How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback that has distinctive engine configuration. It's not the most quiet, but still fun to drive.
Replace the battery for the key fob of your Nissan Juke every two years or when it's at a low. It's easy to do at home, but you'll need a few tools.
Dead Coin Battery
If your Nissan Juke key fob has stopped working the first thing you should look at is the coin battery inside. It could be dead and require to be replaced, which is a simple fix that takes only a few minutes. You can do this by flipping the fob over and removing the small latch and release on the back. Remove the battery that was in use and then insert the new one, ensuring sure that it is facing downwards in the fob. Line up the two halves of fob in a carefully.
If G28 Car Keys has been exposed to water, it will need to be cleaned prior to putting the new battery in. This can be done by using a paper towel, isopropyl alcohol or electronic cleaner, and allow it to dry completely before inserting the battery.
The key fob must also to be paired with the car in order to be able to start the car. This can be accomplished by following the directions in the owner's manual, or using an OBDII scanner. If the key fob is not been paired, this is the most likely cause of why it has stopped functioning. A malfunctioning chip inside the fob can cause it to stop working however, this is a rare. A new receiver module might be required in this instance. If this is the situation, it's best to be replaced by an authorized technician.
Water Damage
Key fobs are powered by batteries and the batteries need to be replaced every two years or as soon as the car stops responding when press the "start" switch. The rubber seals on keys are designed to keep out water, however submerging the key fob in the ocean or in pool water can damage the electronic chip. If this is the situation you'll need to obtain a new key from Nissan or an automotive locksmith.
It's possible that the computer lost connection to the key fob, which could be due to a variety of factors. It can be fixed by restarting the car. If the "Key ID error" message is still visible then you should contact Nissan for assistance.
The three most common reasons for this are dead batteries on key fobs and keys that are not programmed and a damaged, or malfunctioning key fob. The first two issues are easy to resolve, while the third is more difficult to fix on the spot, but it can be fixed with a bit of patience. Compare Nissan Key Replacement prices in your area with WhoCanFixMyCar, and book your repair online. You can read about the experiences of local Nissan dealerships, Nissan mechanics, and garages in a matter of moments.
Faulty Chip
The key fob of your Nissan Juke has a special chip that sends an electronic signal to the car every time you turn it. The key can not function when the chip is damaged. If this is the case the issue can only be solved by replacing the key. There are a variety of reasons your Nissan Juke's key may be defective, such as water damage, a dead coin battery, or a broken receiver module.
Check the chip for water damage in the event that your key fob stopped working after a wash or bath. Make sure that the metal retainers are in good shape and the chip isn't exposed to any water. If you spot any signs of water damage to the electronic component, take off the battery and wipe it down with isopropyl-ethanol or electronic cleaner.
If the chip is damaged If it is damaged, you should visit your local locksmith or dealership. They will need to know the year the make, model, and year of your vehicle to locate a replacement. You will also have to record your VIN (Vehicle ID Number) so that the dealer, or locksmith can know exactly what key you have. This will enable them to find the correct key code and confirm that they cut the right one.
Faulty Receiver Module
The key fob transmits radio frequency signals to your car in order to perform various functions. The key fob can unlock your trunk while you rush with groceries to the car or even start your car by pressing an icon on the fob. It can even open your windows and switch on the horn in case you mistakenly lock your keys in the car.
If the key fob isn't able to work, it may be due to a malfunction in the receiver module. The receiver modules are tuned to receive specific frequencies that correspond with the signals sent by the Nissan key fob. A damaged receiver module can stop your car from responding to the signal received by the key fob from Nissan.
Whatever the way your Nissan key fob ends up getting damaged, it's recommended to have a spare in event that the key is damaged or lost. A locksmith or a dealership can program a spare key that works with your Nissan. This will save you from the hassle of losing your keys or locking them in your car.
If your Nissan Juke key fob has been exposed clean water from the tap or rain, the problem could be solved by cleaning it using isopropyl alcohol or electronic cleaner. If, however, the chip is fried and you need to buy a new key fob that can be assigned to your vehicle by a locksmith or dealer.